FormLabs Vat Design
Posted: Fri Mar 28, 2014 2:46 am
Hey all,
I picked up the FormLabs vat from their store a while back, and finally got around to CADing it up.
Their vat is simply 6 flat acrylic pieces cemented together, with a PDMS layer, about 4 mm thick. Attached is a .rar with DXF files of each part, in case someone wants to laser cut and assemble their own.
I don't often export .DXF, so let me know if there's something wrong with the files...
Cheers!
I picked up the FormLabs vat from their store a while back, and finally got around to CADing it up.
Their vat is simply 6 flat acrylic pieces cemented together, with a PDMS layer, about 4 mm thick. Attached is a .rar with DXF files of each part, in case someone wants to laser cut and assemble their own.
I don't often export .DXF, so let me know if there's something wrong with the files...
Cheers!