Resin thinner

You can discuss Photo-sensitive resins, polymers, and oligomers.
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
3D_Prototype
Posts: 3
Joined: Thu Jun 08, 2017 5:02 pm
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Resin thinner

Postby 3D_Prototype » Thu Jun 08, 2017 5:06 pm

Hi
I use UV curable resin 355nm for 3d printing. The resin viscosity (cps) is around 1000. I'm looking for resin solvent to get viscosity around 400-500. Could you offer me some product to get this value?
Thanks in advance.

cew
Posts: 28
Joined: Tue Jan 05, 2016 5:36 am
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: Resin thinner

Postby cew » Fri Jun 16, 2017 9:30 pm

Low viscosity resins are easier for printing high resolution parts and cleaning. I've recently seen some resin thinners available at 3drensyns such as
https://www.3dresyns.com/products/thinn ... d-dilutant

I'll be keen to hear of any experience or advice using these.

Cheers


[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable