How much ml is a drop of FTD pigment?

You can discuss Photo-sensitive resins, polymers, and oligomers.
minimaker
Posts: 72
Joined: Sat Apr 18, 2015 10:54 am

How much ml is a drop of FTD pigment?

Postby minimaker » Tue Apr 05, 2016 7:41 pm

Does anybody know how much ml a drop of pigment from a Fun to do drop bottle is? I'm trying to solve bleeding problems with my Fun to Do resin by adding pigment but I've no idea how much I'm adding.

Right now I'm experimenting with Castable and red pigment (perhaps I should switch to black?). With 5 drops of pigment on 25ml of resin I'm getting a good results for rings etc. but I still have bleeding if it's something more solid and flat like a capital letter. This becomes irregular instead of straight and flat. Anybody have a suggestion on how much pigment to use?
Let's see what we can do with a LittleRP.

jkao
Posts: 45
Joined: Sun Jan 04, 2015 5:42 am

Re: How much ml is a drop of FTD pigment?

Postby jkao » Wed Apr 06, 2016 12:52 am

Drops are an inaccurate measurement since dropper size, temperature, etc... can all impact this.

I would recommend pigmenting between 0.5% and 2% by weight or volume (both pigment blends and resins are in the 1.1-1.2 density range, which is close enough to be the same between weight and volume at these levels) when using a highly concentrated pigment.

Most highly concentrated pigments are pastes which are dispensed by syringe and not dispensable via dropper.

What kind of pigment are you using?

minimaker
Posts: 72
Joined: Sat Apr 18, 2015 10:54 am

Re: How much ml is a drop of FTD pigment?

Postby minimaker » Thu Apr 07, 2016 7:36 pm

Thanks for the replies. I now have a better idea as to how much to add.

As to the drops, I should have clarified. I know it's not an exact measurement but I was hoping anybody had a ballpark value as at this moment I have no idea how much I'm adding. I've got jeweller's scales on order so with that I should have a way to measure it.

I'm using the pigment of Fun to do themselves. The box normally used for colouring the new white resin (still need to test it). Only thing with the package is that you get a mix of colors while I would have preferred all black. Does anybody know if the pigment color influences the amount of UV passing through the resin? Or is it just a matter of the amount of pigment particles (independent of color) stopping the UV light?

@Joseph, to avoid misunderstanding, in the first line you mentioned 3.25-3.5% while in the second like you mention 1.75/500 grams which would be about 0.35%. Are you referring to a different brand of black pigment in the first line?
Let's see what we can do with a LittleRP.

minimaker
Posts: 72
Joined: Sat Apr 18, 2015 10:54 am

Re: How much ml is a drop of FTD pigment?

Postby minimaker » Fri Apr 08, 2016 7:46 pm

Ah, that clears it up. :) Thanks
Let's see what we can do with a LittleRP.


Return to “Resins”

Who is online

Users browsing this forum: No registered users and 2 guests