DLP Juice Ultra Tough Low Cost DLP SLA Resin Choice Of 6 Colours

You can discuss Photo-sensitive resins, polymers, and oligomers.
mike111
Posts: 10
Joined: Fri Jul 31, 2015 8:27 am

DLP Juice Ultra Tough Low Cost DLP SLA Resin Choice Of 6 Colours

Postby mike111 » Sun Aug 30, 2015 9:48 am

New DLP Juice ultra tough lower cost DLP SLA resin choice of 6 colours 0.05% shrinkage. Cure time 0.5 seconds for per 0.02mm layer.

http://www.ebay.co.uk/itm/262010284873? ... 1555.l2649

hp_
Posts: 300
Joined: Tue Dec 24, 2013 10:25 am

Re: DLP Juice Ultra Tough Low Cost DLP SLA Resin Choice Of 6 Colours

Postby hp_ » Sun Aug 30, 2015 10:42 am

Hi Mike,

this looks interesting, do you have more pictures printing with your resin and testing it?

cheers,
hp

nc42
Site Admin
Posts: 126
Joined: Wed Oct 22, 2014 3:18 pm

Re: DLP Juice Ultra Tough Low Cost DLP SLA Resin Choice Of 6 Colours

Postby nc42 » Sun Aug 30, 2015 1:44 pm

Also your ebay listing is only setup for UK shipping...

Hugues
Posts: 82
Joined: Thu Oct 02, 2014 3:20 pm

Re: DLP Juice Ultra Tough Low Cost DLP SLA Resin Choice Of 6 Colours

Postby Hugues » Mon Aug 31, 2015 6:07 am

And some specs because ultra tough does not mean much. Or comparison with other well known resin brands.

I'm seriously interested.

Only red ? No black ?

mike111
Posts: 10
Joined: Fri Jul 31, 2015 8:27 am

Re: DLP Juice Ultra Tough Low Cost DLP SLA Resin Choice Of 6 Colours

Postby mike111 » Tue Sep 01, 2015 8:20 am

I will upload some pictures of printed parts, I will set up international shipping it is also available in Green Blue Yellow Black White and Clear.

Hugues
Posts: 82
Joined: Thu Oct 02, 2014 3:20 pm

Re: DLP Juice Ultra Tough Low Cost DLP SLA Resin Choice Of 6 Colours

Postby Hugues » Tue Sep 01, 2015 12:20 pm

mike111 wrote:I will upload some pictures of printed parts, I will set up international shipping it is also available in Green Blue Yellow Black White and Clear.


Great, just bought 1 liter black, hope it's tougher than Funtodo "Industrial Blend", we trust you 8-)

Hugues
Posts: 82
Joined: Thu Oct 02, 2014 3:20 pm

Re: DLP Juice Ultra Tough Low Cost DLP SLA Resin Choice Of 6 Colours

Postby Hugues » Wed Sep 09, 2015 1:58 pm

mike111 wrote:I will upload some pictures of printed parts, I will set up international shipping it is also available in Green Blue Yellow Black White and Clear.


Hey Mike,

while my resin is on the way, can you recommend some exposure settings for 50 microns ?

thanks

Hugues

redonix76
Posts: 36
Joined: Mon Aug 17, 2015 2:12 pm

Re: DLP Juice Ultra Tough Low Cost DLP SLA Resin Choice Of 6 Colours

Postby redonix76 » Wed Sep 09, 2015 7:56 pm

Definitely interested in trying this out. Been using FTD DB and SW and very happy with it. If it's just as good or better...then for the price it's definitely worth a buy.

Can someone post some print samples once you guys get to try it out? thanks!!

sloxd
Posts: 22
Joined: Sun Mar 08, 2015 4:25 pm

Re: DLP Juice Ultra Tough Low Cost DLP SLA Resin Choice Of 6 Colours

Postby sloxd » Thu Sep 10, 2015 3:07 pm

Which color is the best for fine details? Please add some more pictures in info. Looks great and affordable :D

mike111
Posts: 10
Joined: Fri Jul 31, 2015 8:27 am

Re: DLP Juice Ultra Tough Low Cost DLP SLA Resin Choice Of 6 Colours

Postby mike111 » Sun Sep 13, 2015 10:24 am

Hugues wrote:
mike111 wrote:I will upload some pictures of printed parts, I will set up international shipping it is also available in Green Blue Yellow Black White and Clear.


Hey Mike,

while my resin is on the way, can you recommend some exposure settings for 50 microns ?

thanks

Hugues



A second would be plenty long enough with that layer height. The thinner the layer the shorter the exposure time thanks for your purchase.