Pigments, layer heights, intensity questions.

You can discuss Photo-sensitive resins, polymers, and oligomers.
adambx
Posts: 119
Joined: Wed Apr 09, 2014 6:33 am

Re: Pigments, layer heights, intensity questions.

Postby adambx » Wed Aug 06, 2014 11:50 am

I've started using some generic brand Grey pigment that is used for normal epoxy. 1.5% concentration and it works like a charm. to give you an idea of the price: you pay around 20 Euro/$27 for 500g..which is a lot cheaper than what FTD or MJ sell it for. You have to do some experimentation though.
Google is your friend.

Cheers

dlp_builder
Posts: 19
Joined: Tue Feb 25, 2014 5:56 pm

Re: Pigments, layer heights, intensity questions.

Postby dlp_builder » Wed Aug 06, 2014 11:09 pm

Hi Adam,

Just to correct you, at Fun To Do we don't sell pigments (yet) Our pigments are tailor made according to our own recipe.

Danny
Www.funtodo.net

adambx
Posts: 119
Joined: Wed Apr 09, 2014 6:33 am

Re: Pigments, layer heights, intensity questions.

Postby adambx » Thu Aug 07, 2014 6:36 am

dlp_builder wrote:Hi Adam,

Just to correct you, at Fun To Do we don't sell pigments (yet) Our pigments are tailor made according to our own recipe.

Danny
http://Www.funtodo.net



I'm sorry, should've read up on that. My point was to show that any reseller who sells small quantities usually needs a good markup to make it worth their while.

Cheers ;)


Return to “Resins”

Who is online

Users browsing this forum: No registered users and 1 guest