Resins For Investment Casting

You can discuss Photo-sensitive resins, polymers, and oligomers.
chill74
Posts: 20
Joined: Tue Jun 16, 2015 3:09 am

Re: Resins For Investment Casting

Postby chill74 » Thu Jul 28, 2016 10:20 pm

jimmyjackson wrote:Can you please suggest some good castable resin supplier in the US ?


MakerJuice WaxCast is the good stuff!

jimmyjackson
Posts: 4
Joined: Thu Jul 28, 2016 7:55 pm

Re: Resins For Investment Casting

Postby jimmyjackson » Fri Jul 29, 2016 12:49 pm

chill74 wrote:
jimmyjackson wrote:Can you please suggest some good castable resin supplier in the US ?


MakerJuice WaxCast is the good stuff!


Tried it and couldn't get a good cast. Who makes B9's resin ?

chill74
Posts: 20
Joined: Tue Jun 16, 2015 3:09 am

Re: Resins For Investment Casting

Postby chill74 » Mon Aug 01, 2016 5:39 pm

jimmyjackson wrote:
chill74 wrote:
jimmyjackson wrote:Can you please suggest some good castable resin supplier in the US ?


MakerJuice WaxCast is the good stuff!


Tried it and couldn't get a good cast. Who makes B9's resin ?


B9 makes B9's resin (Or has it made custom...). They have the MSDS on their website.

The WaxCast casts exactly like wax with no ash and a smooth surface. However...it MUST be cured all the way...meaning it has to be almost yellow. I can post some castings in a few days. I hade some rough surface castings initially when I did not let the resin cure (it was still too orange..and it reacts with investment giving a very rough texture) ...had the same issues with the B9 Cherry/Red when it is not cured...

B9 has a light they sell that will fully cure their resin and I am told WaxCast as well. There are other means of DIY coating that will seal pretty much any castable resin eliminating the need for curing.

Incidently, I have used both Cherry/Red from B9 and WaxCast and they both are castable when fully cured. I prefer WaxCast because you can literally see the wax in it. It also doesn't settle.

B9 has newer Yellow/Green that people are casting very well...but I have not personally tried it.

~Cam

User avatar
sgraber
Posts: 83
Joined: Sun Mar 16, 2014 12:50 pm
Contact:

Re: Resins For Investment Casting

Postby sgraber » Mon Aug 01, 2016 11:41 pm

chill74 wrote:The WaxCast casts exactly like wax with no ash and a smooth surface. However...it MUST be cured all the way...meaning it has to be almost yellow. I can post some castings in a few days. I hade some rough surface castings initially when I did not let the resin cure (it was still too orange..and it reacts with investment giving a very rough texture) ...had the same issues with the B9 Cherry/Red when it is not cured...

B9 has a light they sell that will fully cure their resin and I am told WaxCast as well. There are other means of DIY coating that will seal pretty much any castable resin eliminating the need for curing.

Incidently, I have used both Cherry/Red from B9 and WaxCast and they both are castable when fully cured. I prefer WaxCast because you can literally see the wax in it. It also doesn't settle.

B9 has newer Yellow/Green that people are casting very well...but I have not personally tried it.

~Cam


I think this is the #1 thing people don't do: cure the parts enough. They always want to rush it. Myself, I cure the heck out of it before doing any sort of casting and I have not had a problem with it either at my jeweler.
Research Chemist
MakerJuice UV SLA Resins

jimmyjackson
Posts: 4
Joined: Thu Jul 28, 2016 7:55 pm

Re: Resins For Investment Casting

Postby jimmyjackson » Tue Aug 02, 2016 2:57 pm

Thank you guys.

How many ours do you cure the rings under the UV light. What wattage of UV do you use ?

Can you also post a picture of the all the way cured model to see the color
thank you

chill74
Posts: 20
Joined: Tue Jun 16, 2015 3:09 am

Re: Resins For Investment Casting

Postby chill74 » Wed Aug 03, 2016 4:16 pm

jimmyjackson wrote:Thank you guys.

How many ours do you cure the rings under the UV light. What wattage of UV do you use ?

Can you also post a picture of the all the way cured model to see the color
thank you


My UV light is probably on the weak side, and I can't really cure it as well as I like...but at least 4-5hrs @ 18watts (LED) or so. I use a coating for now. I will likely buy a B9 cure light, or make one similar.

I suspect I need at least double that wattage to cure in a reasonable amount of time.

There are 2 casting issues with resins that I think most manufacturers are trying to solve.
1) The reaction of the resin with the hardening of the investment - This is the curing issue that causes rough surfaces - Better the cure the better the surface quality of the casting.
2) The burnout where ash can cause pitting etc. -right now, most castable resins have pretty minimal ash content with proper burnout -1350F 2hrs min.

cerriousdesign
Posts: 54
Joined: Wed Nov 26, 2014 8:19 pm

Re: Resins For Investment Casting

Postby cerriousdesign » Thu Aug 11, 2016 3:14 pm

I cure my resin with heat, an old heating element, at 200 degrees in a vacuum chamber for 2 hours. Cures the resin all the way through not just on the surface like U.V. does.
Attachments
CAM00035.jpg

User avatar
James
Posts: 136
Joined: Mon Dec 02, 2013 1:56 am
Contact:

Re: Resins For Investment Casting

Postby James » Fri Aug 12, 2016 11:07 am

Interesting. I don't see why the vacuum is needed though. Can you explain this aspect?
I prefer to know nothing about everything rather than everything about nothing. :)

chill74
Posts: 20
Joined: Tue Jun 16, 2015 3:09 am

Re: Resins For Investment Casting

Postby chill74 » Sat Aug 13, 2016 8:58 pm

Test Bracelet Links
WaxCast
R&R Ultravest...
No problems casting WaxCast and these are on the thick side for testing.
Attachments
ProShot_20160813_204041_e.png

vexpertise
Posts: 2
Joined: Mon Feb 13, 2017 12:51 am
Location: MONA TILES COMPOUND, NR. CHHANI CIRCLE, CHHANI ROAD, VADODARA - 390002. GUJARAT, INDIA.
Contact:

Re: Resins For Investment Casting

Postby vexpertise » Tue Apr 04, 2017 2:51 am

The Makerjuice looks interesting. Would love to try it but still have an almost full bottle of FTD castable left. So I'll wait a little. :D Still looking forward to seeing the impressions of others here.

Image

By the way, the link to international resellers on you page does not seem to work.


Return to “Resins”

Who is online

Users browsing this forum: No registered users and 1 guest