How hard is controll this
with one arduino due or another,
the question is ($$ x Work), because for 3d printer the frequence specifications of the change mirrors positions is very x 10³³³ ( ) slow compared with the projectos specs*
one projector for full hd need 60hz, 3 colors * 8 bits (bad quality) and white color
I will need 766 * 60 = 45960 changes per second, in only one mirror, if it need be changed in all cicles,...
for one DLP 3D printer I don´t need it, if my cure time is arround 5seconds, I need change it only one time. 1920x1080 bits and "latch"...
I have time to make this operation, and get a coffee using one arduino due or mega i don´t know...
I will need one UV light, is very cheape, focal system lens, and lens to use the uv light...
I know it need much work, and I don´t know about the chip dmd dlp value,
but it is possible?
This is the place to discuss DLP projectors, UV Lasers, Galvanometers, LCD screens and similar display devices. Also discussed are optics in general.
2 posts [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
• Page 1 of 1
• Page 1 of 1
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable