Redesign of the FlexVat for the LittleRP
Posted: Tue Jan 17, 2017 6:58 pm
The FlexVat for the LittleRP is a big help, however, so completely I was not contented with the design. In spite of the strings of the PFT foil I could straighten the build plate not 100% flat on the foil.
Now I have tried out something and have come on a very easy solution which finds like me, some advantages with himself brings.
I have constructed a frame directly in the opening of the LittleRP fits and as a glass layer I use an acrylic glass XT with a high UV light permeability.
The advantage in this solution is:
1. The build plate lies 100% flat
2. The distance to the projector is reduced
3. The foil of the FlexVats must not be stretched any more so tightly, because it lies on the acrylic glass.
4. you do not need any longer the bottom Frame of the Vat who tight the foil.
Am curious on your opinion
Greeting
Kai from Germany - Goldschmith and Rhino artist
Now I have tried out something and have come on a very easy solution which finds like me, some advantages with himself brings.
I have constructed a frame directly in the opening of the LittleRP fits and as a glass layer I use an acrylic glass XT with a high UV light permeability.
The advantage in this solution is:
1. The build plate lies 100% flat
2. The distance to the projector is reduced
3. The foil of the FlexVats must not be stretched any more so tightly, because it lies on the acrylic glass.
4. you do not need any longer the bottom Frame of the Vat who tight the foil.
Am curious on your opinion
Greeting
Kai from Germany - Goldschmith and Rhino artist