Build Your Own SLA/SLS

The Compact Logistical VAT System.

http://www.mddionline.com/article/convenient-truths-about-gas-plasma-technology Convenient Truths about Gas Plasma Technology Posted in Surface Treatment Services by mddiadmin on February 1, 2009 Gas plasma technology can be used to control the surface chemistry of PTFE and improve the material’s bi...

Hello; Dragokirov;

Kindly post the estimated time of availability of your product, I am interested in purchasing about three pieces in about larger than 150 x 220 mm size. I have attached couple of photos; This is my interchangeable universal VAT frame.


Warm Regards

Hello James

Thanks; Thumbs-up, for your post;

Regards

Saeed

Hello Maurice; It is hard to explain in words, how to bound, Start from one edge, keeping it apart, and keep pressing together slowly from side “a" to side “b"; After Applying, further more by immersing into real hot water, will enhance the transparency. Probably it may not be applicable w...

Autodesk Releases Mechanical Files for Ember 3D Printer


http://3dprintingindustry.com/2015/05/1 ... d-printer/


https://myhub.autodesk360.com/u09/share ... ac8bfe671d

http://spark.autodesk.com/blog/microsoft-and-spark

Microsoft Windows 10 is on board the Spark Platform

So going back to the drawing board after the mess that was the reverse-flexiVAT system I came to the conclusion that maybe I should go for an established system for top-down. So this is my design of the wiper system made especially for my tank (it is an actual custom made fish tank). It is removabl...

Let me see if I understand this process correctly. You position the normal build plate a certain distance from the surface of the resin in the vat. you lower the flex plate to the desired build height on the build. say 50 microns. you cure that layer with the projector and move on to the next layer...