Build Your Own SLA/SLS

Any reason you have the base so tall? Are you planning to put an LED array under it?

Good to know, I'm going ahead and trying the Raspberry Pi LCD concept. Will report back once I get it all setup and going...

the problem is finding a cheap tablet with usb 3.0 The cheapest I've found in europe is around 200 euros. Just looking some more says it works on usb 2.0 also... If it has to be standalone, maybe give up on the iPad display and go with a Raspberry Pi and a 1280x800 7" display. You'd get almost...

Anyone got any updates with there attempts with Daylight resins?

First part was to figure out if there was any interest...I think from there its easier to frame content/agenda IMO.

Slack isn't a bad idea, might be an easier attempt to create continuous conversation from this forum...

All,

Any interest in doing a Google Hangout for SLA 3D printing? (Weekly, bi-weekly, monthly, etc)

If you are interested, PM me with your email address and time zone so we can coordinate a time that works for most that are interested.

After thinking a little more about the display teardown , i decided to find a solution to keep the original backlight functional so i could use it to display red calibration grids or simulate printing ( with red color ) without firing the 50W LED array ... so I decided to cut the metal backing of t...