Build Your Own SLA/SLS

Hi dangre Of course. The real problem with printers with top-down system is the surface tension. It is impossible to print without repercussions ranging from simple to real disasters. There are systems that help leveling and smoothing the surface but do not control the surface tension. The surface t...

After several attempts to control the surface tension, finally I have a system that works properly to print on 100,75,50,35,20,10 microns. This system can be found only on hi end professional printers as Ultra by EnvisionTec. https://lh3.googleusercontent.com/-aA1IekKMzhk/VZgXQ-79g3I/AAAAAAAAA4o/uGM...

another question. Can you print the first layers of different thicknesses? for example, the first three layers of the GUI at 100 microns and 25 microns the rest?

Ok Steve. ********* Lift Sequence ******** G1 {$SlideTiltVal != 0? X$SlideTiltVal:} Z($ZLiftDist * $ZDir) F$ZLiftRate G1 {$SlideTiltVal != 0? X($SlideTiltVal * -1):} Z(($LayerThickness-$ZLiftDist) * $ZDir) F$ZRetractRate {$CURSLICE%3==0? G1 X124 F3000:} G1 X-124 F3000 ;<Delay> %d$BlankTime ;********...

I managed to run intermittently slide system but I need the first layers (that are used to attach to the building platform), work with regularly and after these layers, passing intermittently.


I appreciate any help.

Thanks Steve.

So, if I want to activate the y axis every 4 slices, then :

{$CURSLICE%4==0?G1 Y124 F3000:Y0}
G1 Y-124 F3000

Its works very well, but if I do not want to take the first layers GUI in consideration ?

Hi guys, hi Steve. I have a top-down printer with slider system. In the g code, I have a line like this. G1 X 120 F 3500 G1 - X 120 F 3500 This is done in each layer But actually it is not necessarily so, and I'd like to turn this feature every 3 to 5 layers. How I can achieve that? Thanks for all. ...

Has anyone been able to eliminate the effect of swelling on a printer from top to bottom? I've put a lot of time to solve this problem and still not get fix. I have put a system of flat and clean to force the resin to maintain a proper level and have developed a container with a slot drain excess re...

Super!!!!!!!!

I added to the interest list

Thanks

Hi Steve.
What is the difference of the new slicer?


Thanks again.