Build Your Own SLA/SLS

I'm finishing the 3d printer assembly, there will have to do the stepers rotate anyway,
  I hope to assist me in this endeavor.
Thank you for how much, post photos when ready

https://dl.dropboxusercontent.com/u/53792981/CW_Main_1.0.0.41.zip [/quote] I've tried this version, and has the same problem, do not run the stepers, I have done everything I could do and run, was with rc3 version still can not operate the jog and manual control. Does anyone have running this scrip...

What machine are you using, what's the size of the projector? It sounds like a mechanical projector offset issue. PacManFan Thank you for your attention. The image shift of the problem now is gone, gone, do not know what was happening. My problem now is that I can only do rotate the stepers with CW...

to center stl after slicing once you have loaded your stl to centeralise press move button and then centre object button this will re-center the object cncbasher I'm not talking to center the STL, I'm talking to focus slices when making the projection. And then, there is another firmaware I can use...

erro no cw please post your STL file , which is giving the error using newer versions of CW will require the additional entrys for the profiles to added manualy as they are now held in XML format in your configuration setup once you have loaded your stl to centeralise press move button and then cen...

erro no cw

do not worry the scripts you have will work with any version of CW . what shield are you using ? on your arduino if any it is important to have your drivers correct FIRST if not then motors may not always work ... so have your stepper drivers set to 16 ... set the correct steps per 0.1 in your ardu...

ok so the program is working have you adjusted the steps to match your machine configuration in the arduino code ? as instructed (PlatenStepsPerLayer) and set the switches on your stepper driver to match ( 16 microsteps) see this section in the arduino code: > adjust "PlatenStepsPerLayer"...

if you are 100% that you do not recieve "ok" when using the arduino terminal the problem is your arduino code is not uploaded or running correctly. this needs to be correct before you can move on to CW . check you are uploading the arduinocode correctly to the correct comport & board ...

I'll check, and you return.