Build Your Own SLA/SLS

Thanks! I went through the front. Cutting along the border of the glass. http://www.kvistholm.se/Daylight-Resin I was unable to create a backlight that was even across. So I abandoned this ... How did you go about to remove the metal backing? I'd use a straight edge ruler w/ exacto knife/blade and g...

Well, seeing as no one has posted any photos before... I went ahead and started to take apart the iPad screen. Man, that initial metal backing is a PITA to remove! Seeing as I'm not 100% (not even 50%) sure on what I'm doing, I very well could have take too much apart on this screen, though in my d...

The original diffuser is more than enough , actually the diffuser is made of 5 sheets : reflective sheet / clear sheet (side diffuser for LED strips ) about 1mm thick/ then 3 layers of "pure" diffuser film . Thanks! I guess I will sacrifice on display and try for myself. Hope to cure the ...

Yes, in the past I removed the backlight to use my own UV LED array. Hi, I had good results with the normal backlight. http://www.kvistholm.se/Daylight-Resin I still might try to use a LED array though. Do you think that the original diffuse-sheet sufficient if you would make a LED-matrix like this...

Anderson, Can you cut the cable to the leds and still have the screen work? Yes, in the past I removed the backlight to use my own UV LED array. Hi, I had good results with the normal backlight. http://www.kvistholm.se/Daylight-Resin I still might try to use a LED array though. Do you think that th...

Any reason you have the base so tall? Are you planning to put an LED array under it? Yes, the (future) plan is to have a LED-array. But still it's a bit tall nevertheless. Btw. I found this great way of making a LED-array from LED-strips. Fortunately I already own 5 m UV-LED strips. https://youtu.b...

This becomes my second printer, this time using the Daylight resin. Some links : My first SLA project : http://www.kvistholm.se/SLA-3D-Printer This project (buildlog) : http://www.kvistholm.se/Daylight-Resin-Printer Previous thread for testing : http://www.buildyourownsla.com/forum/viewtopic.php?f=1...

I will start a new thread for my daylight printer soon. The CAD is almost completed and I sourced the most critical components. Will link to that thread soon. PS. I would like to see a simple / offordable background led matrix for the iPad display. But for now I will use the stock one. PS. @dragokir...

Thanks dpizzle, I went through the manual and figured it out.
It needed a brightness-change (yellow mode, fast clicks).
This made the flickering go away.

This solved the issue I had with the one I thought was broken

Looks like photocentric is gonna do an iPad screen printer. http://www.photocentric3d.com/#!Testing-LG-97-2048x1536-Retina-Display/quxkg/56e948bc0cf2bc133ba1973e Very nice, this is great news. @All By the way, I had problems with my Abusemark-driver (I think it's the driver). Where the screens brig...