Search found 119 matches
- Wed Aug 06, 2014 2:36 pm
- Forum: Creation Workshop
- Topic: Request: Always show blank when print cancelled
- Replies: 2
- Views: 6150
Request: Always show blank when print cancelled
It happens quite often that due to experimentation and therefore errors in the build process, the current build needs to be cancelled. If the cancellation happens during a slice or shortly before, the slice is still shown and in an extreme case could overexpose the resin killing the vat. Or maybe a ...
- Wed Aug 06, 2014 11:57 am
- Forum: 3d Prints
- Topic: First prints!
- Replies: 4
- Views: 14269
Re: First prints!
From my experience (same projector, borosilicate glass VAT and Silicone) the SubG+ white bleeds through like hell...even at 500ms exposure. I have a 50x100 mm area though. You could try adding different pigments, and generally just experiment with the concentration..i have a grey pigment and I can v...
- Wed Aug 06, 2014 11:50 am
- Forum: Resins
- Topic: Pigments, layer heights, intensity questions.
- Replies: 12
- Views: 27469
Re: Pigments, layer heights, intensity questions.
I've started using some generic brand Grey pigment that is used for normal epoxy. 1.5% concentration and it works like a charm. to give you an idea of the price: you pay around 20 Euro/$27 for 500g..which is a lot cheaper than what FTD or MJ sell it for. You have to do some experimentation though. G...
- Tue Aug 05, 2014 1:43 pm
- Forum: Software Forum
- Topic: raspberry pi Silent boot
- Replies: 29
- Views: 60846
Re: raspberry pi Silent boot
My idea was to use the pi/BBB only for printing...maybe a http interface to upload a job via Wifi and the Pi only handles GCode interpretation and slice display. Thay way the regular PC is free for other stuff.
Had no time to implement anything yet
Had no time to implement anything yet
Re: 3D scans.
do you have any scans you could show us?
Cheers
Cheers
- Sun Aug 03, 2014 9:22 pm
- Forum: Creation Workshop
- Topic: Update build time on the fly?
- Replies: 1
- Views: 5013
Update build time on the fly?
I'd like to suggest a feature for the estimated build time to update as it's printing. I use a lot of custom Gcode for the lifts/tilts, so I don't need the ";<Delay> %d$BlankTime". The bad thing about it is that the time estimate is way off. It would be nice to see that time updated as the...
- Sat Aug 02, 2014 9:38 am
- Forum: Display Devices
- Topic: Acer H6510BD
- Replies: 48
- Views: 148176
Re: Acer H6510BD
@finhead: how is the sharpness at the edges for you? I'm using a first surface mirror and noticed some issues towards the top of the projected image. Have you had any problems so far?
- Thu Jul 31, 2014 7:46 am
- Forum: Display Devices
- Topic: EKB
- Replies: 12
- Views: 29534
Re: EKB
Are there any picos with 1080p?
- Tue Jul 29, 2014 10:41 am
- Forum: Hardware
- Topic: Nema 17 slipping
- Replies: 4
- Views: 12716
Re: Nema 17 slipping
maybe the motor current of your microstepping driver is just way too low. Check with the motor data sheet and adjust accordingly.
- Mon Jul 28, 2014 12:39 pm
- Forum: Resins
- Topic: Pigments, layer heights, intensity questions.
- Replies: 12
- Views: 27469
Re: Pigments, layer heights, intensity questions.
Hi, thanks for the affirmation. I've been adding more and more pigment now and it works quite well. I've used up all my MJ EZ Pigment (Red). Now I'm adding generic white pigment for epoxy resins...can't tell you where to buy because i still had some at the shop. But if it works out, i'll Post result...