Build Your Own SLA/SLS

Amazon sells some nice and bright LED's and here is the link to a 100 watt one, but they also have a 50 watt one that should work fine. https://www.amazon.com/gp/product/B01DBZIO8K/ref=ox_sc_sfl_title_6?ie=UTF8&psc=1&smid=A14FP9XIRL6C1F And I hate to bad mouth any company but it's my advice ...

This is my latest print and as you can tell it stopped at 5/16 of an inch! Or as I should say it stopped attaching itself to the resin at 5/16 of an inch. You will notice the print is very detailed and flat on the top so my 3D printer is set perfect! But again it stops at 5/16 of an build. But the p...

It goes through the whole cycle and the Z Axis rises but four mm is as high as it goes. I'm trying another print now and will know the results in a couple of hours. I increased the rising of the Z Axis to eight MM between print on printer. I was thing that since the one successful print I did it was...

OK folks I need your help with this printer. I've only been able to do one successful print and I posted those photos here. I used the same settings that I did with that first successful print and I've tried to use the same settings and different setting in order to replicate that successful print. ...

Hi, I've uploaded a short youtube clip to show my raspberry pi controlling the lcd resin printer :) https://www.youtube.com/watch?v=iaklWyfK_EI&feature=youtu.be and now with working image on lcd printer screen https://youtu.be/KFn1JrHySe8 cheers, hp Do you have instructions on how to connect Ra...

After two weeks of trying to get this thing to work I finally did! The printer arrived intact, but it was damaged even before they ever sent it! The resin container had stripped screws on the bottom. Also the screws on the side were taped crooked and needed to be redone so they sit flat. Wires insid...