Build Your Own SLA/SLS

Hi mandrea, I have one of these: https://www.amazon.co.uk/gp/product/B01KHJIWGC/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 , but after connecting it only a does a slight movement and never anything more. Do I need to set something in sprinter? Thanks in advance. Cabo if you read the datasheet,...

is there a a spetial nut for the original screw? Im afraid to change the motor...Maybe to get the same motor with a separate screw and with the same step of screw I do not answer this question, you should search on the net, I had available the bolt in my drawer parts, so I made this conversion, not...

the original screw makes a z shift of about 3 mm per revolution, I use one that makes 9 mm per revolution

I modeled this 1 cm thick, to be placed above the engine, because the joint hit the end stop sensor

Hi mandrea, Can you tell me or link me to the parts to upgrade the lead screw and the backlash nut. Thanks. the original screw shaft has a pitch 4, it is glued to the motor (I highly recommend do not disassemble the stepper motor), I had at home an ordinary nema 17, 12 volts with a 5 mm hub and a s...

Good news on the front " Z axle ": I modified the shaft with a pitch 2, I added a screw anti backlash with amazing result, no more waving effect ... http://i629.photobucket.com/albums/uu12/andreamain/knight/P_20170302_215100_1_p.jpg http://i629.photobucket.com/albums/uu12/andreamain/knight...

Cabo beautiful printing and 3d model also, congratulations, I contacted James to ask for an update on the new model, and if it is available for the model that we use, improved Z axis (maybe HIWIN) because this printer deserves the best Hi mandrea, did you hear back from James? csader, he told me he...

Cabo beautiful printing and 3d model also, congratulations,
I contacted James to ask for an update on the new model, and if it is available for the model that we use, improved Z axis (maybe HIWIN) because this printer deserves the best

I see the "Instant" slicing when I use CW with my PC and printer directly connected, but when I enable the "Export Slices to CWS" option in CW to upload the file to Photonic3D on my Pi, slicing takes a very long time. Is this option not necessary? I tried to export the files to ...