Search found 13 matches
- Thu Jul 07, 2016 9:57 am
- Forum: Software Forum
- Topic: I can not move manually the motor in CW but the printer works, why?
- Replies: 11
- Views: 27639
Re: I can not move manually the motor in CW but the printer works, why?
The reason the move 10 button was moving without stopping is because the firmware has a hardcoded value for the number of steps when move 10 is activated (The "100000" below). This number needs to be changed to match your stepper/microstepping/pitch. there is also no code in the firmware f...
- Thu Jul 07, 2016 9:50 am
- Forum: Hardware
- Topic: Help Z-Axis Calibration because I am so lost?
- Replies: 4
- Views: 13817
Re: Help Z-Axis Calibration because I am so lost?
Since this was never definitively "solved" This sounds like a case of the manual "move 10" command using a hard-coded number of steps, which is not based on the layer thickness and set separately in the firmware from platten steps per layer. the number or steps per layer in your ...
- Thu Jul 07, 2016 9:39 am
- Forum: Hardware
- Topic: Usable projector list + hacks
- Replies: 30
- Views: 146897
Re: Usable projector list + hacks
Similar to the Acer h6510bd, the Acer h6500 works quite well (and can sometimes be found much cheaper). The color wheel however has no clear section, so exposure times are quite long (20-30 seconds) unless the color section of the color wheel is cut away or the unit is "simply" moved out o...