Build Your Own SLA/SLS

10.28 sec for 0.1 mm
LCD/SLA printer resin ONLY
It reminds me of something

From today


1,5 seconds for 50 microns thickness- poor quality



1 second for 50 microns thickness- started much better but the LCD controller died (((

[quote="hp_
" but cure times are ~25 seconds per layer

cheers,
hp[/quote]

As I wrote you, forget everything you know about LCD printers

Still I have not a good quality printing. The reasons were in the z axis, in the resin / forgot to mix it / and in the vat. The main is that the vat is directly on the display and have no distance. I hope today to have a success if I have enough time.
Drago

thank you hp_
Forget everything you know about the LCD printers! The LED array and the drivers cost about $ 200. I think it's very cheap
Drago

I experiment with 7 inches 1280x800 with led array. The speed is 1,5 seconds for 50 microns thickness

if you have not done it, I can explain you
Drago

I tried but without any success. The problem is in the vacuum, not in the sticking. In theory this works but not in practice.
Drago

With a UV sensitive resin
I think it's too early for Daylight Resin. For a cheap and slow printer is OK, but if you want to be fast, the price will be the same regardless of the polymer.

I use 7" 1280x800 LCD display. This pcb is designed specifically for it.