Search found 49 matches

by DanOrgan
Tue Jul 19, 2016 9:16 am
Forum: LittleRP
Topic: Any DLP project are good
Replies: 8
Views: 18324

Re: Any DLP project are good

Obviously, you need good native resolution. 1920 * 1080 is good, bigger is better.
And you need short focus, or you could not fit projected image to small VAT.
by DanOrgan
Fri Jul 15, 2016 10:52 am
Forum: LittleRP
Topic: How to configure firmware/software for tilt option?
Replies: 1
Views: 8629

Re: How to configure firmware/software for tilt option?

It seems, CNC Shield is different from standard Little RP Shield. And the instruction was intendant only for Little RP.
I installed old 1.0.36 CW, and just enabled Tilt options in it. Then, connect my tilt driver to X axis. Now, it is moving!
by DanOrgan
Sat Jul 09, 2016 12:24 pm
Forum: LittleRP
Topic: How to configure firmware/software for tilt option?
Replies: 1
Views: 8629

How to configure firmware/software for tilt option?

I have got my CNC Shield recently. But no luck with making it work properly. Z-axis is good, but Y (tilt-axis) is unreachable from CW. I am using Creation Workshop RC54 for Tilt. As was said here http://www.littlerp.com/?page_id=55 , I had set some new GBRL parameters: $1 = 415.00 and $7 = 128. Then...
by DanOrgan
Fri May 06, 2016 2:54 am
Forum: Commerical Machines
Topic: The problem of choosing the 3D printer!
Replies: 1
Views: 10404

Re: The problem of choosing the 3D printer!

If you are from Russia, then consider domestic dlp/sla printers. And domestic resins are relatively cheap.
As example: http://russiandlp.ru/
by DanOrgan
Thu Apr 28, 2016 7:55 am
Forum: Commerical Machines
Topic: Any opinions on the Slash machine?
Replies: 1
Views: 9975

Re: Any opinions on the Slash machine?

I don't like this idea.
For SLA/DLP technology, the printing speed is measured by height/time, not by volume/time.
It is meaningless, to print big solid flat objects.
by DanOrgan
Thu Apr 28, 2016 7:40 am
Forum: LittleRP
Topic: Need Little RP Shield alternative
Replies: 3
Views: 12214

Re: Need Little RP Shield alternative

Firecardenal, thank you for advice!
Then, I'll just switch from Little RP Shield to Cnc shield.
by DanOrgan
Wed Apr 27, 2016 11:15 am
Forum: LittleRP
Topic: Need Little RP Shield alternative
Replies: 3
Views: 12214

Need Little RP Shield alternative

Hi! Little RP Maker Tilt Kit is out of stock now. And I am not good with soldering.
Is there any alternative for Little RP Shield, with more than one axis support?
by DanOrgan
Sat Apr 09, 2016 2:00 pm
Forum: LittleRP
Topic: resolutions you can achieve on littleRP
Replies: 7
Views: 18638

Re: resolutions you can achieve on littleRP

I have got roughly 30 micron resolution with Acer P1500. 65,5 * 37 mm build area.
But It is only possible with the projector modification. Without mod, you can't focus properly to small area.
by DanOrgan
Fri Apr 08, 2016 9:14 am
Forum: LittleRP
Topic: Shrinkage?
Replies: 8
Views: 19422

Re: Shrinkage?

Recently, I have tried some cheap local (Made in Russia) experimental resin. It was printable, but all models were significantly short in Z-axis, maybe 10%-20% compare to X and Y. And straight vertical walls were not actual straight but curved. Now, I am printing with FunToDo resins and have no majo...
by DanOrgan
Thu Mar 31, 2016 3:56 am
Forum: LittleRP
Topic: Anti-backlash Nut worn out
Replies: 9
Views: 21413

Re: Anti-backlash Nut worn out

Sorry, I forgot to answer to this thread. It was not a problems with mechanic or electronics. My PC was the cause of that. CPU was to weak to transfer G-code to Arduino, and it is results in loosing steps. http://www.buildyourownsla.com/forum/viewtopic.php?f=5&t=4974 Now, my prints are not bad: ...