Build Your Own SLA/SLS

Can you post please a ps file as an example?
Did i need a Transparent or a white backgroud?
The mask dimension have to be like the projector pixel? I have 1980x1080 projector pixel, so the mask have to be the same? or did i need the mask in build area dimensions?

Hello again, i have try to design and input a mask. The problem is now that when i load the mask into CW and activate it, the beamer show only black. I have try to slice something, and to print but nothing happens. I also can't show the Calibration squares if i have the mask activated. this is the f...

It works, thank you again

Hi, i´m trying to control my Projector with the RS232 Port. I have a RS232 to USB adapter. My problem is to generate the right code, i have try already to insert the Code for the Manual but CW does´t accept it. as an example i have try to insert the code to turn the Projector on 0x06 0x14 0x00 0x04 ...

My Vat ist now also working. I have Stresstest it and Print a lot of Objects on the same film with out of negativ results.

The trouble was that the projector mounting plate is softened by the heat and the beamer is slightly tilted forward. Thus it was no longer parallel to the build plate. I have now designed a stabiler one and mount it. The problem is now gone. here you can see a picture of the modified plate http://ww...

Hi, i have a problem with my prints. Every 1mm i have on my test cube a "stair" (i don to know how to call it) I have try exposure time between 1,5 an 10 sek. on 0,05mm and 0,1mm. I get the best result with 6sek. Also with anti aliasing on/off from 1,5x to 5x I check the result when i´m pr...

Try the Firmware from my blog.
Connect Motor 1 to Z Driver
Motor 2 to E0 Driver
Case fan to E0 power output
Endstop to Z-Max

I am using a 0,5mm Sil-Gel612 on the flex. But not 1:1 how it normal have to be used. i´m mix it A1 : B0,5. The result is much harder than the original mix and less such as a gel. The bottom can move +-4-5mm. I have only two prints done now, but i thing it´s enough. Sorry for my bad english guys :oo...

First I want to thank for the positive criticism @tom-res I have now printed for the first time, two images are in the blog. more to follow I have ordered from http://cutworks.de . They cost € 48 apiece, the drawings I will soon publish to rebuild. but first I want to make sure that no problems occu...