Build Your Own SLA/SLS

Thank you, So i have changed the value to $2=400 in the GRBL console - Now the printer prints for a while and then lifts really high and stops is no longer in the liquid.

I don't really understand how its possible or what im doing wrong.

Howdy everyone, I had an issue of someone plugging the stepper driver in the wrong way. (blowing up no only the stepper driver but the uno also). I have put GRBL version 0.8a on with the following settings: GRBL .8a Values for LittleRP w/o Tilt $0 = 200.00 (steps/mm x) $1 = 200.00 (steps/mm y) $2 = ...

Thank you sir!! So i went to github.com/goopyplastic/littlerp2 and followed the guide to modify the projector. (Was easy thankfully) :D Thank you for putting up the parts that will make life easy, can you also supply the files to laser cut our own? (Also im getting these following errors when trying...

Thanks, So i have made the projector level again and tried to change the height of the printer side by adding the long skinny plates to the front and a extra 20mm spacer. (I think that's what you meant to do?) IMG_1712.JPG By doing this has actually put the gird nearly dead center on the mirror whic...

Hey everyone, I have received my Little RP2 the extended height and build area version. Managed to set it up (probably incorrectly). I have been using B9 Black resin, and the project is the Acer X152H My main issue is when im trying to focus the projector (Acer X152H) i'm unable to get all of the fo...