I already have the BBB, but no clue on how to go from there. There are not a lot of motor controllers for the beagle
I'd appreciate any help if you guys have links or advice.
Cheers!
Statistics: Posted by adambx — Sun Apr 20, 2014 5:20 am
]]>
]]>
]]>
Statistics: Posted by PacManFan — Thu Mar 20, 2014 12:39 am
]]>
the flybook has a screen and keyboard with usb etc, netbooks are also cheap and available.
I have not had time to play with the PI, so can not be much use there, but what if CW exported the gcode and images to a file, the file on a sd card, then run on the PI.
Statistics: Posted by johnrpm — Wed Mar 19, 2014 5:17 pm
]]>
]]>
]]>
I think looking at or shows how things could go with a low cost Singleboard computer. As slicing is rather cheap (performance wise) for DLP compared to FDM this should also be possible on such a low performance machine. Having a web service instead of a desktop UI gives you the freedom to use whatever client you want to control the machine without having the need to have a desktop-computer right next to it that has to be on and running for the whole print job.
I'm printing FDM stuff on 3 printers with one small linux box using RepetierServer (actually a non public beta currently) for quite a while and couldn't be more happy.
I'm not technical enough to know how you could probably use the HDMI out from the command line without a desktop running but that would save loads of performance as you wouldn't need it.
Statistics: Posted by Helmi — Sun Mar 09, 2014 9:43 am
]]>
]]>
]]>
]]>
]]>
]]>
]]>
]]>